0311-87820556
13731116690(Whatsapp)
Brief Introduction And Application:
The CO2 laser marking machine uses far infrared band with 10.6um wavelength and CO2 gas as working medium.
Download-Specification: Technical Parameters For Dat CO2 Laser Marking Machine.pdf
The CO2 laser marking machine uses far infrared band with 10.6um wavelength and CO2 gas as working medium. It fills CO2 and other auxiliary gases into high voltage discharge tube to generate glow discharge, which makes gas molecules emit laser. After amplifying the laser energy, it forms a laser beam for material processing. The laser beam vaporizes the surface of the processed body to achieve the purpose of marking. It has stable performance and long life. Maintenance-free, long-term continuous work.
Advantage
Excellent performance and simple operation
Imported high-power CO2 laser
Scanning Head of SCANLAB from Germany
Low cost and stable use
Long service life and can be inflated repeatedly
The electro-optic conversion efficiency up to 75%
24-hour after-sales service
Multi-material marking
Mark faster and more accurate
Applicable materials
Suitable for leather,Artificial leather,synthetic leather,Clothing fabric,Packaging and printing, wood products, advertising and decoration materials, acrylic and other materials
Applicable industries
Widely used in garment, leather, shoes and hats, advertising, packaging and printing industry, etc.
Technical Specification for CO2 Laser
C30A | C55L | |
Wavelength | 10.55μm~10.63μm | 10.55μm~10.63μm |
Continuous power output(1 | ) >30W | ≥55W |
Power stability | <±5% | <±5% |
Pattern of laserspot | >98% TEM00 | >98% TEM00 |
LaserSpot size(2) | 1.8±0.2 ㎜ | 1.8±0.2 ㎜ |
Beam divergence angle(3) | 7.5±0.5mrad | 7.5±0.5mrad |
Laser spot quality | M2<1.2 | M2<1.2 |
Degree of polarization | >100:1 | >100:1 |
External modulation signal | TTL Signal, frequency <25kHz | TTLSignal, frequency <25kHz |
Cooling mode | Air cooling | water-cooling |
Laser weight | 5.2kg | TBD |
Voltage | 48VDC<±2%, Noise / fluctuation P-P value <1%supply voltage | 48VDC<±2%, Noise / fluctuation P-P value <1%supply voltage |
Power current | (4) ≤12A | ≤25A(5) |
Thermal load produced | ≤600W | ≤600W |
Cooling water velocity | N/A | ≥5.7L/min |
Cooling water temperature | N/A | 15℃~30℃ |
Hardness of cooling water | N/A | <150mg/L |
ambient temperature | 5℃~40℃ | 5℃~40℃ |
Working altitude | 2000m | 2000m |
Ambient humidity | Non condensation | Non condensation |
Preionization time | 42S | Non |
(1)When the laser head temperature is higher than 25 degrees, the laser power decreases by 1% when the temperature rises 1 degrees. (2) the diameter of the aperture at the exit of the 1/e2.(3) beam divergence angle. (4) The typical value is 10A (5)The peak current is 35Aand the duration is 1ms |
0311-87820556 13731116690(Whatsapp)
Doria